Articles are calculated and invoiced in Swiss Francs (CHF).

 

Articles can be ordered via the chart of the website and paid with PayPal on-line. If you prefer a different payment method, please contact me by email.

 

Please note that the goods will be delivered immediately upon receipt of your payment. Products are sent by insured postal service to the above address.

 

All defects or objections must be declared within 7 days after material received. If the delivery does not correspond to your expectation, the products may be returned and I will compensate your payment up to a business expenditure of 10.00 CHF. Delivery cost has to be paid by the customer. Only undamaged and unused returned material will be accepted.

 

The warranty is one year for material and manufacturing deficiencies. Any rejected device must be returned to us and - providing that the defect is indeed covered by the guarantee - it will be repaired or replaced free of charge. The customer cannot claim any warranty rights if the product is not registered immediately after purchasing, or if damages have been caused by inappropriate handling or a lack of maintenance of the product.

 

Due to the small production lots, delivery delays are possible. If this is the case, you will be informed together with the order acknowledgement. An estimated delivery date will be given.

 

The design is subject to change without prior notice. Only the newest revision of the products will be delivered. There is no obligation on the manufacturer's part to supply older versions for subsequent deliveries.

 

Raiffeisenkasse Schwarzwasser
CH-3150 Schwarzenburg
Account number 21709.20, BLZ 80860, SWIFT RAIFCH22, 
IBAN CH 52 8086 0000 0021 7092 0

 

District court IX, Schwarzenburg-Seftigen

iTaper is a data base program used for documenting and analyzing hexagonal cane rod tapers. It indicates for every rod the taper, stress, differential and slope curves in the form of a diagram. The measuring units can be switched over from Inches to millimeters. At the push of a button, you can establish the construction drawings for rods consisting of 1 up to 4 parts, as well as the knot offset drawings with three different offset patterns.

In addition, the program offers functions for calculating the distances between the guides as well as extensive documentation possibilities. For each rod, it enables you to store any number of images and other documents. One of the interesting features are the taper comparison and the taper design, as they enable you to compare different rod tapers with each other or to derive new tapers from well-proven cane rods. At the push of a button, you can convert line classes and lengths, and the rod action can be influenced through various parameters. It goes without saying that the calculated values can be overwritten for your own individual adaptation.

 

• Document and analyze any number of rods
• Compare the tapers among each other
• Various diagrams (taper, stress, slope and differential curves)
• Automatic preparation of construction drawings for rods consisting of 1 up to 4 parts
• Splice length calculation with various types of knot offsets
• Taper derivation from existing fishing rods
• Integrated conversion of line classes and actions
• Setting values for the planning form
• Measuring unit convertible from Inches into mm
• Extensive search function
• Program and manual in German language

iTaper offers many different functions, and we suggest that you try them out without delay. The manual will allow you getting a general idea; you can also download the program in order to test it free of cost during 30 days. Upon expiry of this period, the program needs to be licensed. To do this, please start the program and request your license by means of the reference number that will appear below the starting image. A mouse click on the license button will open an e-mail for the request. Upon paying the license fee, you will receive the license number per mail.

 

If you prefer not to purchase online, please contact me by e-mail.

 

 

 

 

 

• 
• 
• 
• 
• 
• 
• 
• 

The Centrix dispenser makes sure that your preferred tippet material is always ready at your fingertips. It consists of a light-weight red anodized aluminum housing rot, of 4 plastic tippet spools and of a stainless steel locking pin with integrated needle. The pin is secured by a split ring and can therefore also be fastened to your fly vest.

Filling: After filling the four spools with your preferred material, the spools can be inserted into the housing. To do this, use the needle to pull the Monofil through the rubber of the exit hole and insert the spool with the tightly stretched thread into the housing. Then insert the remaining spools in the same manner, making sure that the sense of rotation alternates between the spools.

 

If you prefer not to purchase online, please contact me by e-mail.

 

SPECIFICATIONS:

 

 

• 
• 
• 
• 

This fly reel is the ideal choice for light up to medium freshwater fishing. It fascinates by its unique design and a faultless and high-precision processing. The individual elements are manufactured of high-strength aluminum, stainless steel and high-quality synthetic material. The result is a reel that distinguishes itself by an extremely low weight while being very robust and long-lasting.

The spool turns without play on plastic-covered stainless steel ball-bearings and is inhibited by means of a simple snap brake. Thanks to the good accessibility of the spool, it can be optimally slowed down by hand during the drills, either on its edge or on the inner surface.

 

If you prefer not to purchase online, please contact me by e-mail.

 

Spool diameter: 78 mm

Width: 38 mm

Weight: 110 gr.

Line capacity: DT4 - DT6 / WF7

 

 

• 
• 
• 
• 
• 
• 
• 
•